When
Cover deteriorated, support suitable
Fix
Replace the cover
Check
Confirm all openings and edges
24/7 Emergency Line
Ocala Chimney Chase Cover Replacement
Replace the broad enclosure cover with a fitting planned around its openings and edges.
- Family owned
- Licensed and fully insured
- Same-day service is available
- Locally owned
Get a Free Written Estimate
Takes about 30 seconds
Your request has reached us
We will call you to arrange the inspection.
Rather call? (352) 218-3565
- Family owned
- Licensed and fully insured
- Same-day service is available
- Locally owned
What Working With Us Looks Like
A chase cover is the metal top on a framed chimney chase, and replacing it stops rain from pooling and rusting through. The new top is cut to the chase and sloped to shed water, with a storm collar around the flue pipe. We measure the chase before fabrication. Rot found under the old top is repaired first.
-
Family owned
A family-owned Ocala business, so the person who quotes the job is the one who answers for it.
-
No Hidden Fees
You see the full price before any work starts, and nothing is added to it afterwards.
-
Workmanship Warranty
Every repair we complete is covered by our workmanship warranty.
-
Same-day service is available
Same-day appointments are available when the schedule allows, so a leak is not left waiting.
On this page
Identify the complete enclosure top
A chase cover spans the top of a framed chimney enclosure. It is different from a flue cap, which protects an outlet. The cover’s perimeter, penetrations and retained supporting area determine the replacement needed. Matching only the broad outside dimensions can leave important connection details unresolved.
Describe what you have noticed from a safe location, including visible distortion or stains below the top. There is no need to climb up for measurements. The fitting should be selected from the actual arrangement once suitable working access is available.
Inspect what lies beneath a failed cover
A deteriorated top may have allowed water to affect the enclosure. A new metal surface does not itself restore weakened framing, cladding or another concealed component. Where damage is found, chimney chase repair needs its own assessment and work description.
The replacement estimate should distinguish cover removal, preparation of the retained top and installation of the new fitting. If the condition below cannot be fully established beforehand, the limitation should be explained. That is preferable to covering a damaged support and treating the new lid as a complete enclosure repair.
Plan the openings and drainage details
The cover has to work around the installed chimney components while managing water at its edges. Its shape and connections should suit that system. The material and fabrication approach affect how the fitting is installed; a flat-looking sheet from a photograph is not a complete specification.
Any separate termination components remain subject to their own instructions. We do not alter the installed system simply to make an available cover fit. Where several openings are present, identify which connections the replacement includes so future service can be planned accurately.
Coordinate the work and retain a useful record
Tell us about previous enclosure work and any current water entry. Earlier patches may help explain the arrangement but do not establish the condition underneath. The team plans appropriate access and protection for removing the old cover and handling the replacement.
After installation, keep the work description and clarify whether the enclosure itself required repair. If the original complaint was water inside the home, any remaining concern should be followed up in relation to the identified path. Arrange a free Ocala inspection to discuss a cover that fits the chimney enclosure you actually have.
Fit the broad top to its openings
A chimney chase cap is another name homeowners may use for the broad metal cover over a framed enclosure. Chase cap replacement needs the enclosure dimensions and the details around each vent opening; a cap over an individual flue is a different component.
A custom chase cover may be needed when the existing arrangement does not suit a standard size. If a stainless steel chase cover is proposed, ask how its openings, edges and connections will fit the retained system. Material choice alone cannot correct a cover that drains poorly or leaves an unsuitable connection.
Signs It Is Time to Have This Looked At
Rust, separation or a distorted cover can leave the enclosure below needing attention too. Our Ocala chase cover replacement service assesses the existing metal top and its connections before a new cover is specified. Ocala Chimney Pros begins with a free inspection and explains the replacement, preparation and any separate enclosure damage found along the way.
- Corrosion at the broad top cover
- A distorted or loose perimeter
- Water concerns around the enclosure
Choose the right chase cover scope
Choose work for the part that failed
When
Enclosure also damaged
Fix
Coordinate chase repair
Check
Do not conceal failed supporting material
When
Only an outlet cap has failed
Fix
Assess cap replacement
Check
Keep the two components distinct
Book Within 72 Hours and Save 10%
Save 10% on any service booked within 72 hours of your free inspection. Ask us to include the offer.
What Your Free Inspection Covers
- Assess cover and penetrations
- Check retained support where accessible
- Specify replacement and attachment
- Separate enclosure repair from cover work
Planning your chase cover work
- Cover geometry
- The perimeter and number of openings affect fabrication and fitting.
- Underlying condition
- Preparation or enclosure repair can extend beyond replacing the metal top.
Replacing the enclosure cover
-
Review the existing top
Identify the perimeter and installed openings.
-
Assess retained support
Explain damage that may need separate work.
-
Specify the new fitting
Plan material, shape and connections.
-
Install and explain
Complete the cover and record any remaining enclosure concern.
More chase cover repairs and related work
Questions Ocala Homeowners Ask Us
What is a chase cover on a chimney?
A chase cover is the metal top that seals a framed chimney chase around a factory-built flue pipe. It is shaped to shed rain off its edges, with a collar where the flue passes through; a rusted or flat chase cover lets water pool and leak into the chase framing below.
What is the difference between a chimney cap and a chase cover?
A chimney cap sits over the flue opening to keep rain and animals out. A chase cover seals the whole top of a framed chase. Prefab chimneys usually need both, the chase cover on the box and a cap on the flue pipe, and replacing one does not fix a leak in the other.
Why is my chase cover rusting?
Chase covers rust when they are made of thin galvanized steel or sit flat, so rain stands on them. Rust streaks on the siding below are often the first sign. A replacement in stainless steel or another rust-resistant metal, cross-broken or sloped to drain, outlasts painting over the rust.
Urgent Chimney Concern in Ocala?
Our 24/7 emergency line can help arrange service for urgent chimney damage after immediate hazards are addressed.
For an uncontrolled fire or carbon monoxide alarm, leave and call 911 from outside. For suspected gas, leave without investigating or operating electrical switches and call the utility or 911 from outside.
(352) 218-3565Chimney & Fireplace Brands We Work With
Heat & Glo 
Heatilator 
Rutland 
Copperfield Chimney Supply 
Olympia Chimney and Venting 
DuraVent
Arrange chimney chase cover in Ocala
Replace the broad enclosure cover with a fitting planned around its openings and edges.